
CNC turning and milling of difficult materials
Inconel, titanium, stainless and heat-resistant steels. Prototypes from 1 piece, small and large batches, tolerances down to 8 µm, aerospace MJ threads. Parts for aerospace and veterinary implants.
About CNC T&M
CNC T&M is based in Białystok, Poland. We turn and mill parts in our own workshop in Sobolewo, near Białystok.
We machine parts to customer drawings – from single prototypes to large batches on CNC bar-feed lathes. We specialise in materials many shops prefer to avoid: titanium alloys, Inconel, heat-resistant and stainless steels. We also cut aerospace MJ threads.
Why CNC T&M
- 14 years of experience in CNC machining for aerospace, medical, defence and veterinary.
- Tolerances down to 8 µm – critical dimensions checked on every part, also in large batches.
- Difficult materials and thin walls: Inconel, titanium, stainless steel – including parts that distort during machining.
- Prototypes from 1 piece, then small and large batches on CNC bar-feed lathes.
- Direct contact with the person who machines your part.
- Quote within 7 days of receiving the drawing; lead time typically 2–10 weeks.
Our services
CNC turning
Small-batch turning
Prototypes and short runs from 1 piece. Doosan Lynx 300M lathe with C-axis: up to Ø300 mm and 700 mm length.
Large-batch turning
Two CNC bar-feed lathes (bar up to Ø20 mm): repeatable series of small precision parts.
Difficult materials
Titanium alloys, Inconel, heat-resistant and stainless steels: materials that wear tools quickly and require experience.
MJ special threads
Aerospace MJ threads (e.g. MJ95×1 in Inconel) and other special threads, checked with thread gauges and micrometers.
Precision down to 8 microns
Tolerances down to 8 µm (0.008 mm) on critical dimensions.
Technical advice
We support you at every stage of the project, from concept to finished part, optimising the manufacturing process.
Quality control
Every part is checked against the customer's drawing. Critical dimensions are measured on every piece, also in large batches.
Machine park
Doosan Lynx 300M with C-axis (Ø300 × 700 mm), Maho Graziano GR200 (Ø160 × 300 mm), 2 CNC bar-feed lathes (up to Ø20 mm), Bridgeport VMC 800 machining centre (800 × 500 × 500 mm).
CNC milling
3-axis milling
Bridgeport VMC 800 machining centre, working area 800 × 500 × 500 mm: faces, pockets, holes, threads.
Prototype machining
Fast and accurate prototypes, so you can verify the design before series production.
Small-batch production
Efficient milling of small batches, tailored to the customer's needs.
Other services
Measurement and inspection
Micrometers, calipers, thread gauges and a profile projector with micron accuracy.
Material certificates
On request we supply mill certificates from our material suppliers – just mention it when ordering.
Engineering support
We help adapt the drawing for machining: tolerances, material, sequence of operations – before production starts.
Have a drawing? Send it for a quote.
Send your drawing (PDF, STEP or DXF) via the contact form or by e-mail. Tell us the material, quantity and deadline – within 7 days we will reply with a price and lead time.
Contact
Production workshop
ul. Rybacka 26
15-509 Sobolewo (near Białystok), Poland
Registered office
CNC T&M
ul. 42 Pułku Piechoty 72J/25
15-181 Białystok, Poland
VAT ID: PL9661957260
Opening hours
Monday – Friday
9:00 – 17:00 (CET)
Phone
+48 516 225 892